C1 and C2 are not standard names. Motul C1 is the chain cleaner(not lubricant). Motul C2 is the lubricant(the useful thing). Good old kerosine oil can be used for cleaning.

Similarly one may ask, how do you lube a Motul c2 chain?

When applying Motul Chain Lube Road, turn the rear wheel to move the chain and apply a thin even layer of Motul Chain Spray Road. Spray at least two inches away from the chain and apply the lube only to the inside of the chain. The spray head has a capillary tube that allows the spray to be applied with precision.

Likewise, is Motul Chain Lube good? Motul Chain Lube is better than 3M. Motul Chain Lube helps in diminishing rubbing between metal connections and reducing wear and tear. A very much oiled chain will move with less protection, will last more, and won't destroy alternate parts of the drive prepare.

Additionally, which is the best chain lube for Royal Enfield?

MOTUL Chain Lube

What type of lubricant is best for bike chains?

Best Dry Chain Lubes

• Squirt Long Lasting Dry Lube.
• Best Wet Chain Lubes.
• ProGold Xtreme Chain Lube. Find Out More.
• White Lightning Wet Lube. Find Out More.
• Best Ceramic Lubes. Muc Off C3 Dry Ceramic Lube.
• Finish Line Ceramic Wax Lube. Find Out More.
• Ceramic Speed UFO Drip. Find Out More.
• Speciality Chain Lubes. Molten Speed Wax.

Related Question Answers

How often should I lube my motorcycle chain?

A motorcycle chain should be lubricated every 300-600 miles to ensure peak performance and a long life. Lubricate the chain after riding, not before. This allows time for the solvents in the spray to evaporate before the bike is used again, and lets the lubricant penetrate the link properly.

What can I use for O ring Lube?

The solution is: Use silicone lubricant for o-rings and seals to be safe. Silicone lubricant is waterproofing and lubricating. It costs $10 for a small tube and is available at all auto parts stores. Be safe, use silicone grease on your o-rings and rubber seals in pressure washer wands, hoses and pumps.

What is chain lube made of?

Dry lubricants are most often made based on paraffin wax, or PTFE (“Teflon”) lubricants. Sometimes as a mixture of both. The dry lubricants are usually suspended in some sort of liquid, or solvent, that allows them to flow between the chain pins and rollers.

How do you clean MX chains?

Place your bike on a stand, grab a grunge brush or wire brush, a can of degreaser and your favorite lubricating spray. Use the brush to work away debris, turning the rear wheel as you move down the links. Rinse and repeat, as needed. Once clean and dry, spray on the lube.

How do you use chain spray?

To apply lube, deposit a drop on the top of each link as you slowly backpedal for a few revolutions, so the lube has a chance to work its way in. Wipe off excess lube—if you don't, it can attract more dirt to your chain. Use a light, waterproof lube such as Boeshield T-9 Waterproof Lubrication.

What is Motul c1 and c2?

Motul C1 is the chain cleaner(not lubricant). Motul C2 is the lubricant(the useful thing). Good old kerosine oil can be used for cleaning. So C1 is a waste of money.

Can we use wd40 on my bike chain?

WD-40 doesn't really lubricate much of anything. It's actually a de-greaser, so it will remove any lubricant from bicycle chains, cables and other pivot joints. If you're cleaning your chain for re-lubrication purposes with a product other than WD-40, then WD-40 will be fine to use.

Can we use engine oil for chain lube?

Using engine oil as a chain lubricant might serve you the purpose. Engine oil could get greasy at lower temperature or might even solidify. Improper lubrication would lead to chain wear, jerky transmission and added friction. Engine oil costs more than the chain lube.

How do you clean a bullet chain?

1. Stand the bike on the Centre Stand.
2. Turn on your engine and put it in 1st gear.
3. Release the clutch and let the wheel spin in air.
4. Take the CHAIN LUBE first and spray evenly over the chain for a good 1 -2 mins.
5. Let it stand for a gap of 5mins.
6. Now use the CHAIN BRUSH to scrape off the dirt and grime from the chain .

What is the best motorcycle chain cleaner?

Best Motorcycle Chain Cleaner – Reviews

• Motul C1 – Best Motorcycle Chain Cleaner.
• Bel-Ray 99478-A400W – Best Cleaner for O-ring Motorcycle Chain.
• Maxima 75920 – Best Cheap Motorcycle Chain Cleaner.
• WD-40 Specialist Motorcycle Chain Cleaner.
• Muc-Off 650US – Motorcycle Chain Degreaser.

How do I know if my bike chain needs Lube?

Check for adequate lubrication by listening for squeaks while riding. If you find either condition, your chain needs at least a spot-cleaning. To spot-clean the chain while it's still on your bike: Brush out the links with a firm brush (an old toothbrush also works).

Can I use 3in1 oil on my bike chain?

3in1 oil is the worst oil you can use. When the light lubricants evaporate it leaves a paste behind which will build up and is hard to remove. Stick with a silicone lube or if you want an oil then get some mobile one and an oil can. It is a great lube for cables and chains

How do I know my bike chain size?

Begin by counting the number of teeth on the largest front sprocket and largest rear. These numbers are often printed right on the sprockets and cogs. Next, measure the distance between the middle of the crank bolt to the rear axle. This is also the chain stay length.

How long do bike chains last?

500 to 5,000 miles

Does new bike chain need lube?

Don't do this! The factory lubricant all by itself is usually good for several hundred miles of service if the bike is not ridden in wet or dusty conditions. It is best not to apply any sort of lube to a new chain until it is clearly needed, because any wet lube you can apply will dilute the factory lube.

How often should I clean my bike chain?

If you are a frequent rider, using your bike several times throughout the week, your bicycle will benefit from a regular cleaning and lubrication of the drive chain. Bicycle Tutor recommends cleaning and lubricating your bike's drive chain at least once every month to maintain optimal performance and protection.

Do bike chains need oil?

Bicycle chain lubricant, chain lube or chain oil is an essential item for your bike maintenance. This gets the muck and dirt out of the way so the lubricant can get where it needs to go. Some bicycle chain lubes will only work if applied to a clean, degreased, dry chain – read the instructions on the oil to check.

What chain lube do the pros use?

The pros? They use straight 5W-20 but with a Bike-Specific Lube Manu's sticker on the bottle.